Tiba brake cylinder

Brake cylinder (Wheel Cylinder), which is another name of the wheel cylinder, is a part of the hydraulic cup brake system. It is usually placed on top of each wheel of the car.

This hydraulic piece, when the brake pedal is pressed, applies pressure to the brake shoes against the direction of the wheel cup and causes the car to stop or slow down. It was invented by Bendix in 1958.

p>

The casing of this piece is made of gray cast iron, but in more modern models, it is made of aluminum, which is lighter than the cast iron type.

Brake cylinder components:

1-cylinder

2- Two pistons

3- pan tires

4- Dust collector

5- spring

6- ventilation screw

The components of this part are usually connected to the brake shoes and work in such a way that the oil that the master cylinder or the brake pump sends to the brake cylinder through the oil pipes. There is an oil inlet in the middle of the cylinder between the two pistons. After entering, this same oil sticks the tires of the pan to the cylinder wall. The compressive force caused by the sticking of the tires on the cylinder wall causes the pistons to move away from each other, and then this force is applied to the shoes of the pads, and the friction between the wheel cup and the pads leads to a stop or a decrease in speed. It becomes a car. In this system, they use a spring to keep the pistons apart from each other.

The brake cylinder of Etihad Talai Asia Company is produced from raw materials with bags.

The wheel cylinder is one of the safety parts of the car, that is why it should be checked periodically

Damage of this part can cause a lot of damage, such as failure of the brake cup or brake circuit, impaired brake performance, loss of brake oil, etc.

Signs of brake cylinder failure

1-, the brake system works poorly

2-, the brake oil is leaking.

3-, the brake pedal should be dough-like.

Brake cylinder is an important and basic part in car safety. The high quality of this part is necessary because of its important task in maintaining the security and safety of the car. For this reason, Etihad Talai Asia Trading Company, using its high experience, supplies parts and spare parts of domestic cars with the highest quality to all parts of the country.