The simplest type of spring is the level spring or Coil spring. The coil spring used in the car is produced from a steel rod that is wrapped in the form of consecutive rings. The diameter of the steel rod, its height and the number of rings determine the resistance and strength of the spring. In general, the number of rings increases. and increases the length of the flexibility and increasing the diameter of the steel rod increases the strength of the spring. The position of this part is between the body and the wheels of the car. To determine the strength of the spring, a factor called the spring coefficient is used.
Advantages and disadvantages of the level spring:
This part is a mechanical part that is used in situations such as energy release, mechanical shock absorption, storage, etc. >. This spring experiences torsional stress when a lot of tension and pressure is applied to it.
They have a longer life than the flat spring and its failure is less.
Among its disadvantages, we can mention the low weight bearing and it wears out over time.
These parts need to be inspected like other mechanical parts because there is a chemical layer on it, this layer creates resistance against rust. Over time, this chemical surface is lost and its protective power decreases, eventually the spring will rust.
The springs of Etihad Talai Asia Company are produced from the best type of spring alloy by cold screwing and have a lifetime warranty.
Breaking and wear of the level spring
The function of this part is to store and release energy, this action causes wear and eventually breaks the spring.
Wearing and fatigue of the spring reduces the ability to absorb shock, release and store energy and causes this part to break.
In general, the level spring breaks less than the flat spring. The causes of this fracture can be called wear and tear.
Decreasing the height of the level spring
One of the things that is common among some car drivers in our country in order to make the car sportier is to use the sports part of this part.
The height of the car is reduced by using sports springs. Of course, this lowering of the height is correct if it is done in principle.
The lower the height of the spring, the less energy it absorbs. In order to reduce the height, some people heat the spring, which changes the index of the spring to a large extent and resembles a rigid body.
Lol spring is an important part, it must be replaced when it wears out or breaks. The high quality of this piece is important to save money and time. In this regard, Etihad Golden Asia Company, using its high experience, supplies parts and spare parts of domestic cars with the highest quality to all parts of the country.
