405 heater water inlet hose with TU5 engine

The hoses used in cars are designed in such a way that they have a high resistance against chemical substances and pollutants, heat, cold and pressure, for example, hydraulic hoses are produced from elastic and composite plastics.< /p>

High pressure hoses are used in other industries that deal with high pressure hot water in addition to the automotive industry. This type of hose is produced by companies producing polymer, composite and rubber materials in different sizes. they do The materials used in this piece must be of high quality because they are always under pressure.

The hoses of Etihad Talai Asia Company are produced with the highest quality and efficiency using the best type of material that is highly resistant to pressure and heat.

The upper radiator hose is one of the main and essential components of the car engine cooling system. This piece is located on top of the radiator and has a combination of polyester and rubber

Radiator upper and lower hose mechanism:

This part is connected to the car engine on one side and to the radiator on the other side. In general, this piece is a tube-shaped conduit or intermediary, which directs the radiator liquid from the car engine to the radiator. Heat and pressure rise as the temperature of the coolant increases. This part is made of rubber and therefore it must have high resistance against pressure and heat. Another important point about this part is the absence of bursting and tearing due to heat and pressure. After replacing this part, it is necessary to check the size of the coolant in the car’s cooling system.

Symptoms of faulty hoses at the top and bottom of the radiator:

Cracking on the outside is a sign to recognize that this part is damaged, the more and deeper the cracks, the more fragile and worn the part is, and this part should be replaced as soon as possible.

>

Observation of uneven swelling or swelling on the surface of this piece is another sign of failure.

Scaling or so-called double skinning is another cause of failure in rubber parts, including this part.

Effects caused by failure of the upper and lower radiator hose:

•, The most obvious damage effect of this part is the reduction of water in the radiator of the car, the least damage of which is the overheating of the wires (wiring and wires) and finally their damage.

•, the failure of this part in some cases due to too much water in the car can cause the cylinder head to burn.

Causes of failure of the upper and lower radiator hoses:

•, One of the reasons for the breakdown of this part is the damage to the front parts of the car.

Another cause of failure is not using standard antifreeze and antifreeze (radiator fluid).

How to recognize the quality of hose types:

•, If this piece is made of high quality raw materials, normally its surface should be smooth and transparent. But if it is produced using normal raw materials, it is not transparent and its surface is cloudy.

•, Another sign of quality is the absence of stains and double-posting of this piece.

Lifetime of car hoses:

The life of this part varies depending on the type of materials used in its design and production. In this way, if high-quality raw materials are used during production, most of the time its lifespan is nearly four years, but if average raw materials are used to make it, this part will have a useful life of about one year.

A hose is a sensitive and vital part, a car engine is similar to a human heart in terms of its function, and other parts of a car are like other parts of the body. For this reason, the high quality of this part is required, in this regard, Etihad Talai Asia Company, using its high experience, supplies parts and spare parts of domestic cars with the highest quality to all parts of the country.